✨ New Arrivals Just Dropped!Explore
$4.71
Original: $13.45
-65%Action Leprechaun Woodcraft Pattern—
$13.45
$4.71The Story
Decorate your yard for St. Patrick's Day! Make this cute leprechaun as one piece or add eye-catching waving arm motion. Complete instructions are included on our full size pattern. Requires our Parts and Motor Kits (38" tall).
Make this cute leprechaun in one piece or add waving arm motion with our low-cost motor kit and hardware.
Dimensions:
about 38" tall x 39" wide
Wood:
48" x 48 piece of 1/2" thick exterior grade plywood
4" x 7" piece of 1/4" thick plywood
Tools:
Hand held sabre saw with a smooth cutting non-chipping blade
Drill
1/16", 1/8", 3/16", 1/4", 3/8", 9/16", 5/8", and 3/4" dia. drill bits
Hardware: (required for motor assembly and project assembly)
( * = Available from Winfield Collection as part of Motor Kit #MOT)
( + = Available from Winfield Collection as part of Leprechaun Hardware Kit #W1029KIT).
* Motor Assembly
* Motor Arm ?Çô 3/8" x 1/2" x 2-9/16" metal
* Set Screw ?Çô One
* Swing Arm ?Çô One 9" long
Screws ?Çô
* Four #4 x 3/4" long
* Four #6 x 5/16" long, pan head
+ Fourteen #8 x 1" long
* One 1/4" dia. x 3/4" long
+ Eleven #8 x 1-1/2" long, flat head
* Lag Screw ?Çô One 1/4" dia. x 1" long
+ Bolt ?Çô One 1/4" dia. x 2-1/2" long, must have clear shank of 1-1/2" long.
+ Nut ?Çô One 1/4" I.D.
+ Washer ?Çô Two 1/4" I.D.
+ Bushing ?Çô Two 1/4" I.D. x 1" O.D. Nylon
+ One 1/4" I.D. x 1/2" O.D. x 9/16" long Nylon
Required for Mounting:
Eyescrew ?Çô Four 5/16" I.D. x 11/16" long
Tiedown ?Çô Four 3/16" x 10" long steel rods
Supplies:
Transfer paper (#CARB)
Pencil and clear tape
Sand paper ?Çô Medium and fine grits
Wood Filler ?Çô Non-shrinking, fast drying for wood flaws (#WF8)
Paint brushes ?Çô 3/4" and 1/4" wide brushes and a fine tipped detail brush
Wood Glue - exterior (#GLUETB3)
Paint:
White water based primer for a base coat (#PRIMQT) and the following suggested colors of acrylic paint:
2001-Antique
2019-Fleshtone
2020-Red Iron Oxide
2023-Brown Iron
2030-Burnt Sienna
2041-Bittersweet
2044-Coral
2048-Grape
2055-Autumn
2067-Leaf Green
2068-Christmas Green
2072-Lima Green
2085-AC Flesh
2086-Toffee
2093-Pigskin
2126-Medium Flesh
2401-Light Ivory
2425-Territorial Beige
2436-Charcoal
2459-Crocus Yellow
2471-Hunter Green
2477-Denim
2478-Periwinkle
2505-White
2506-Black
2604-14K Gold
Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
More Info
Description:Make this cute leprechaun in one piece or add waving arm motion with our low-cost motor kit and hardware.
Dimensions:
about 38" tall x 39" wide
Wood:
48" x 48 piece of 1/2" thick exterior grade plywood
4" x 7" piece of 1/4" thick plywood
Tools:
Hand held sabre saw with a smooth cutting non-chipping blade
Drill
1/16", 1/8", 3/16", 1/4", 3/8", 9/16", 5/8", and 3/4" dia. drill bits
Hardware: (required for motor assembly and project assembly)
( * = Available from Winfield Collection as part of Motor Kit #MOT)
( + = Available from Winfield Collection as part of Leprechaun Hardware Kit #W1029KIT).
* Motor Assembly
* Motor Arm ?Çô 3/8" x 1/2" x 2-9/16" metal
* Set Screw ?Çô One
* Swing Arm ?Çô One 9" long
Screws ?Çô
* Four #4 x 3/4" long
* Four #6 x 5/16" long, pan head
+ Fourteen #8 x 1" long
* One 1/4" dia. x 3/4" long
+ Eleven #8 x 1-1/2" long, flat head
* Lag Screw ?Çô One 1/4" dia. x 1" long
+ Bolt ?Çô One 1/4" dia. x 2-1/2" long, must have clear shank of 1-1/2" long.
+ Nut ?Çô One 1/4" I.D.
+ Washer ?Çô Two 1/4" I.D.
+ Bushing ?Çô Two 1/4" I.D. x 1" O.D. Nylon
+ One 1/4" I.D. x 1/2" O.D. x 9/16" long Nylon
Required for Mounting:
Eyescrew ?Çô Four 5/16" I.D. x 11/16" long
Tiedown ?Çô Four 3/16" x 10" long steel rods
Supplies:
Transfer paper (#CARB)
Pencil and clear tape
Sand paper ?Çô Medium and fine grits
Wood Filler ?Çô Non-shrinking, fast drying for wood flaws (#WF8)
Paint brushes ?Çô 3/4" and 1/4" wide brushes and a fine tipped detail brush
Wood Glue - exterior (#GLUETB3)
Paint:
White water based primer for a base coat (#PRIMQT) and the following suggested colors of acrylic paint:
2001-Antique
2019-Fleshtone
2020-Red Iron Oxide
2023-Brown Iron
2030-Burnt Sienna
2041-Bittersweet
2044-Coral
2048-Grape
2055-Autumn
2067-Leaf Green
2068-Christmas Green
2072-Lima Green
2085-AC Flesh
2086-Toffee
2093-Pigskin
2126-Medium Flesh
2401-Light Ivory
2425-Territorial Beige
2436-Charcoal
2459-Crocus Yellow
2471-Hunter Green
2477-Denim
2478-Periwinkle
2505-White
2506-Black
2604-14K Gold
Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
Description
Decorate your yard for St. Patrick's Day! Make this cute leprechaun as one piece or add eye-catching waving arm motion. Complete instructions are included on our full size pattern. Requires our Parts and Motor Kits (38" tall).
Make this cute leprechaun in one piece or add waving arm motion with our low-cost motor kit and hardware.
Dimensions:
about 38" tall x 39" wide
Wood:
48" x 48 piece of 1/2" thick exterior grade plywood
4" x 7" piece of 1/4" thick plywood
Tools:
Hand held sabre saw with a smooth cutting non-chipping blade
Drill
1/16", 1/8", 3/16", 1/4", 3/8", 9/16", 5/8", and 3/4" dia. drill bits
Hardware: (required for motor assembly and project assembly)
( * = Available from Winfield Collection as part of Motor Kit #MOT)
( + = Available from Winfield Collection as part of Leprechaun Hardware Kit #W1029KIT).
* Motor Assembly
* Motor Arm ?Çô 3/8" x 1/2" x 2-9/16" metal
* Set Screw ?Çô One
* Swing Arm ?Çô One 9" long
Screws ?Çô
* Four #4 x 3/4" long
* Four #6 x 5/16" long, pan head
+ Fourteen #8 x 1" long
* One 1/4" dia. x 3/4" long
+ Eleven #8 x 1-1/2" long, flat head
* Lag Screw ?Çô One 1/4" dia. x 1" long
+ Bolt ?Çô One 1/4" dia. x 2-1/2" long, must have clear shank of 1-1/2" long.
+ Nut ?Çô One 1/4" I.D.
+ Washer ?Çô Two 1/4" I.D.
+ Bushing ?Çô Two 1/4" I.D. x 1" O.D. Nylon
+ One 1/4" I.D. x 1/2" O.D. x 9/16" long Nylon
Required for Mounting:
Eyescrew ?Çô Four 5/16" I.D. x 11/16" long
Tiedown ?Çô Four 3/16" x 10" long steel rods
Supplies:
Transfer paper (#CARB)
Pencil and clear tape
Sand paper ?Çô Medium and fine grits
Wood Filler ?Çô Non-shrinking, fast drying for wood flaws (#WF8)
Paint brushes ?Çô 3/4" and 1/4" wide brushes and a fine tipped detail brush
Wood Glue - exterior (#GLUETB3)
Paint:
White water based primer for a base coat (#PRIMQT) and the following suggested colors of acrylic paint:
2001-Antique
2019-Fleshtone
2020-Red Iron Oxide
2023-Brown Iron
2030-Burnt Sienna
2041-Bittersweet
2044-Coral
2048-Grape
2055-Autumn
2067-Leaf Green
2068-Christmas Green
2072-Lima Green
2085-AC Flesh
2086-Toffee
2093-Pigskin
2126-Medium Flesh
2401-Light Ivory
2425-Territorial Beige
2436-Charcoal
2459-Crocus Yellow
2471-Hunter Green
2477-Denim
2478-Periwinkle
2505-White
2506-Black
2604-14K Gold
Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
More Info
Description:Make this cute leprechaun in one piece or add waving arm motion with our low-cost motor kit and hardware.
Dimensions:
about 38" tall x 39" wide
Wood:
48" x 48 piece of 1/2" thick exterior grade plywood
4" x 7" piece of 1/4" thick plywood
Tools:
Hand held sabre saw with a smooth cutting non-chipping blade
Drill
1/16", 1/8", 3/16", 1/4", 3/8", 9/16", 5/8", and 3/4" dia. drill bits
Hardware: (required for motor assembly and project assembly)
( * = Available from Winfield Collection as part of Motor Kit #MOT)
( + = Available from Winfield Collection as part of Leprechaun Hardware Kit #W1029KIT).
* Motor Assembly
* Motor Arm ?Çô 3/8" x 1/2" x 2-9/16" metal
* Set Screw ?Çô One
* Swing Arm ?Çô One 9" long
Screws ?Çô
* Four #4 x 3/4" long
* Four #6 x 5/16" long, pan head
+ Fourteen #8 x 1" long
* One 1/4" dia. x 3/4" long
+ Eleven #8 x 1-1/2" long, flat head
* Lag Screw ?Çô One 1/4" dia. x 1" long
+ Bolt ?Çô One 1/4" dia. x 2-1/2" long, must have clear shank of 1-1/2" long.
+ Nut ?Çô One 1/4" I.D.
+ Washer ?Çô Two 1/4" I.D.
+ Bushing ?Çô Two 1/4" I.D. x 1" O.D. Nylon
+ One 1/4" I.D. x 1/2" O.D. x 9/16" long Nylon
Required for Mounting:
Eyescrew ?Çô Four 5/16" I.D. x 11/16" long
Tiedown ?Çô Four 3/16" x 10" long steel rods
Supplies:
Transfer paper (#CARB)
Pencil and clear tape
Sand paper ?Çô Medium and fine grits
Wood Filler ?Çô Non-shrinking, fast drying for wood flaws (#WF8)
Paint brushes ?Çô 3/4" and 1/4" wide brushes and a fine tipped detail brush
Wood Glue - exterior (#GLUETB3)
Paint:
White water based primer for a base coat (#PRIMQT) and the following suggested colors of acrylic paint:
2001-Antique
2019-Fleshtone
2020-Red Iron Oxide
2023-Brown Iron
2030-Burnt Sienna
2041-Bittersweet
2044-Coral
2048-Grape
2055-Autumn
2067-Leaf Green
2068-Christmas Green
2072-Lima Green
2085-AC Flesh
2086-Toffee
2093-Pigskin
2126-Medium Flesh
2401-Light Ivory
2425-Territorial Beige
2436-Charcoal
2459-Crocus Yellow
2471-Hunter Green
2477-Denim
2478-Periwinkle
2505-White
2506-Black
2604-14K Gold
Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
