Bird Bell Wind Chimes Woodcraft Pattern

These eye-catching "Bird Bell" Wind Chimes will make wonderful additions to any back yard or patio.

Simply attach our WInd Chime Bell (sold below) inside, hang and listen to the pleasing sounds as the wind catches the leaf below.

(about 10" wide x 18" tall)

More Info

Dimensions: About 10" wide x 18" tall

Wood:
One - 1X2 x 12" long board, #2 or better grade pine
Two - 12" x 16" x 1/4" thick pieces of Finnish plywood (#FPLY4)

Tools: Hand held sabre saw (jig saw), table saw, band saw or scroll saw with a smooth cutting non-chipping blade, drill, 1/4" and 1/16" dia. drill bits.

Hardware:
Washer - Two 1/4" dia. I.D.
Wind Chime Bell - Two 4" plated steel (#BELL1).
Plastic Eyes - Four 12mm yellow (#PE102).
Fishing Line - 25 lb. test, approximately two 36" lengths.

Supplies:
Pattern transfer paper (#CARB), pencil & clear tape.
Sand paper - medium & fine grits.
Wood filler - non shrinking, fast drying for wood flaws.
Paint brushes - 2", 3/4", 1/4" and fine tip detail brushes.
Wood glue-exterior (#GLUETB3).
Masking Tape

Paint:
White water base primer (#PRIMQT) for a base coat and the
following suggested colors of Delta Craft paint:
#2052-Kelly Green
#2065-Apple Green
#2074-Ocean Blue
#2076-Crimson
#2078-Straw
#2090-Hippo Grey
#2505-White
#2506-Black

Sealer:
High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection